Mail-in from all 50 states
Print Your CAD File
Upload an STL, OBJ, 3MF, or STEP and get a real quote with a ship date. File checked by a person, printed in engineering materials, shipped anywhere.
Already have a CAD or STL file? Upload it and get a quote from a person
Send your STL, OBJ, 3MF or STEP file from any US state and we print it in PLA, PETG or engineering plastics and ship the part back. A single print in PLA or PETG is $29 to $75 shipped in the lower 48, with a firm price after we check the file. Engineering materials, parts that carry load and quantities are $7 per machine hour plus $0.15 per gram, specialty filaments $0.30, with a $95 minimum order. No file yet? A photo next to a ruler and two measurements gets a written quote for a part we model, and simple replacement parts start from $95.
If you already have a CAD file, send it with the intended use and the dimensions that matter. We review the file for printability and quote any repair work before printing.
Here is the middle path. Upload your STL, OBJ, 3MF or STEP through the quote form, tell us what the part does, and an engineer checks the file, picks orientation and settings for the load, and sends you a real quote with a ship date. Problems with the file get flagged before anything prints.
Materials run from PLA for a fit check to carbon fiber nylon and polycarbonate for end use parts.
Examples of typical work



Example images of typical work, to help you picture your part. Have something like this? Send a photo for a quote.
What happens after you upload
File check
Manifold errors, thin walls, overhangs, and tiny features are caught and either fixed or sent back with notes.
Material and orientation
We set the layer direction for the load path, choose wall and infill for the use, and pick a material if you have not.
Quote with ship date
Price and turnaround together, before anything prints. Approve it by replying to the email.
Print and inspect
Critical dimensions checked against your model. Supports removed, surfaces cleaned.
Finish on request
Inserts, sanding, smoothing, paint, or assembly, quoted with the print.
Ship
Boxed and shipped anywhere in the US. Carrier estimates depend on destination and service.
Materials you can choose
| Material | Best for | Why |
|---|---|---|
| PLA | Looks and fit checks, display models | Low cost, stiff, sharp detail. Softens in a hot car, so not for anything that lives outside or near heat. |
| PETG | Housings, brackets with light load, moisture exposure | Tougher than PLA with better temperature and chemical resistance. A good default for indoor functional parts. |
| ASA | Outdoor parts, automotive and marine trim, UV exposure | UV stabilized and a candidate for outdoor use. Color and service life still depend on exposure and the specific grade. |
| Nylon (PA) | Gears, clips, snap fits, living hinges, wear surfaces | Nylon grades differ in flexibility, wear and moisture uptake. Check the specific grade and exposure before selecting it. |
| Carbon fiber nylon (PA-CF) | Stiff brackets, fixtures, jigs, drone and robotics frames | A candidate for stiff fixtures. Moisture, print orientation and load affect dimensions and strength. Not for safety-critical structures. |
| Polycarbonate (PC) | High heat, impact, transparent or translucent parts | Heat and impact properties depend on the grade. Plain PC is not inherently UV stabilized and needs protection outdoors. |
| TPU (flexible) | Gaskets, bumpers, grommets, seals, feet | Rubber like flexibility in a range of hardness. Replaces torn rubber parts the manufacturer never sold separately. |
No file yet? That is the other half of what we do
If what you have is a broken part, a sketch, or a photo, you do not need a file. Mail in the part and we scan it, or describe the idea and we model it. See our reverse engineering and 3D modeling services, or just send what you have through the quote form and we will tell you the fastest route to a part.
Design and inspection references
Common questions
What file types can I upload?
What if my file has problems?
How do I choose a material?
Do you print one part or production runs?
Can you scale or modify my file?
Is my design kept confidential?
Ready to start?
Upload your file with the quote form. If it is native CAD, say so in the description and we send a share link.
Get a Free Quote